Page 1 of 1
ZANZIBAR TILES
Posted: Mon May 25, 2009 3:25 pm
by graann
I am trying to find out how you tile a wall with irregular shaped 10 cm x 10 cm wall tiles. ( Topps tiles Zanzibar)
I assume tile spacers can be used but because of the irregularity of the tiles,must be used with installers eye for detail.
Any help appreciated.
Posted: Mon May 25, 2009 3:32 pm
by thescruff
The left side matches the right, and the top matches the bottom, so normal spacers should be fine.
Make sure you get them all the same way round.
Posted: Thu May 28, 2009 5:35 am
by m3 fitter
if the tile is so irregular ie: different sizes 9mm / 10mm / 11mm then just space by eye with a larger joint than usual ie: 5-8mm as opposed to 3mm - 4mm which is normal for walls
Posted: Thu May 28, 2009 8:44 am
by thescruff
The edges are wavey M3 but they all match so the gap is uniform.
Provided you get them all the same way up
Posted: Thu May 28, 2009 4:24 pm
by m3 fitter
