Page 1 of 1
How to lay lino?
Posted: Mon Jun 14, 2010 5:22 pm
by kintangoman
Goodevening everyone, hope you can take time off watching the World Cup to give me a bit of advice?
I need to lay some lino, & just need some pointers regarding how to go about it? Also, is it ok to lay lino ontop of existing lio? Nothing wrong with present one, just that it doesn't look nice & is not pleasing to the eye?
Thanks in advance for all help!
Kintangoman
Re: How to lay lino?
Posted: Tue Jun 15, 2010 9:23 pm
by tictic
hi mate.
when i do vinly..mainly saftey flooring,i use f ball products.
you might want to look into this stuff(best out their imo)..,you will want..styccobond 45,use a 2mm "v" notched trowel to spread wait till it goes "tacky" then lay vinly(just do the far end off the room first)..then the bottom off the room.
almost forgot....
(make this up before anything)...
get a piece of 12mm ply about 12"x8" and wrap a thick bit of carpet around the "bottom halves" off both sides,(use the styccobond to stick carpet to the ply) ..
and you will use this to run over the vinly to smooth it to the subtrate..
now the exsisting vinly i "think" you may have to clean/ prime this first mate,so you will have a good bond,but check in the website of ..f-ball if using their products..
-- Tue Jun 15, 2010 11:26 pm --
sorry bud.. forgot to add..
when cutting vinly i use the "hooked" stanley blades,..this way imo.. you have MORE CONTROL when cutting.
.
best off
Re: How to lay lino?
Posted: Tue Jun 15, 2010 10:01 pm
by kintangoman
thanks tictic, will check their website for more info. from the info uv provided so far, i seem a bit worried. hope i'll pull it off though. many thanks again.
Kintangoman.
Re: How to lay lino?
Posted: Tue Jun 15, 2010 10:10 pm
by thescruff
If the old lino isn't stuck down, you could use it as a template to cut the new piece.
You may want to leave it in the sun for a while, as it works better when warm.
Re: How to lay lino?
Posted: Tue Jun 15, 2010 10:14 pm
by tictic
kingtangoman..
its not that bad mate..might sound it,...but it aint bud...
just take your time,think it through first,then a dry run.. and you will be saying to yourself.....FECK IS THAT IT....
dont forget tho,to get ur cuts before you stick the vinly down ...just like tiling, do your cuts before fixing ...
Re: How to lay lino?
Posted: Tue Jun 15, 2010 10:41 pm
by kintangoman
thanks scruff & tictic. will take a deep breath and proceed over the week-end.
Kintangoman