Page 1 of 1
Help me progress
Posted: Tue Jul 20, 2010 10:36 pm
by wonlongpong
About to tile round a bath. Will be fitting an electric shower over it at a later date. Have previously fit moisture resistant plasterboard and tanked with BAL WP 1 kit to be on the safe side. Tiles are 250 x 330 x 8 white ceramic tiles. Any advice with regards to adhesive and grout? Seems to be conflicting advice depending where you look. TIA.
Re: Help me progress
Posted: Tue Jul 20, 2010 11:47 pm
by marc1106
buy a bag of Bal ctf3 adhesive and a bag of Bal flexi grout
(or as many bags as you need really
)
Re: Help me progress
Posted: Wed Jul 21, 2010 12:02 am
by tictic
single part flexible adhesive and grout,(bagged for both)..grout after 16 hrs...your tile is to big for a tubbed adesive.
Re: Help me progress
Posted: Wed Jul 21, 2010 8:02 am
by wonlongpong
Tiles too big for ready mix!!! I was afraid of that. I'm not the greatest when it comes to mixing stuff. Early attempts at patch plastering when more ended up on the floor are testament to that. One more thing to research methinks.
Looking for ctf 3 on the net brought up mention of "admix". Any real need for it?
Thanks for the above replies.