Page 1 of 1
BnQ cooke and lewis corner radius base unit/worktop.
Posted: Fri Nov 11, 2011 5:33 pm
by philnotts
Hi all. Ive been asked to fit some worktop BnQ cooke and lewis corner radius base units. This is my first encounter with a round end corner base unit and im wondering what radius or what jig i will need to be able to route the end of the surface? any help would be greatly appreciated. Failing that i till resort to making my own, alothough i dont really want to resort to this.
Many thanks, phil.
Re: BnQ cooke and lewis corner radius base unit/worktop.
Posted: Sat Nov 12, 2011 3:18 pm
by royaloakcarpentry
I have a purpose bought jig with various radius on it. haven't a clue where I got it from now or the make of it.
If you can't find something similar on the net then as you say, you will need to quickly knock a jig up.
Re: BnQ cooke and lewis corner radius base unit/worktop.
Posted: Sat Nov 12, 2011 6:46 pm
by speed
Unika do a Aperture Jig, screwfix or howdens will stock them. im not 100% but i think base units are 200mm radius
Re: BnQ cooke and lewis corner radius base unit/worktop.
Posted: Mon Nov 28, 2011 8:49 pm
by joiner_uk
You do not really need to buy or make a jig unless you would use it often, just use a trammel with the router.