Page 1 of 1

Sliding Table

Posted: Thu Dec 13, 2007 3:29 pm
by geoffg
Could someone please tell me what the small hook / peg is called which holds the two halves of a sliding table together. And where can I get some to replace my broken ones.
Cheers in anticipation of the Xmas dinner not disappearing down the gap in the centre of the table
geoff :-)

Posted: Thu Dec 13, 2007 4:54 pm
by Bespoke Cabinet Maker
Hi Geoff

It may help if you post a photo of what parts are remaining to help with the identification.

But you could just use a toggle clip available from the big sheds and little sheds.

Or it could just be a wooden dowel what you are looking for again the big and small sheds.

Alan

Posted: Fri Dec 14, 2007 10:00 am
by geoffg
Cheers Alan,
It's just a flat hook that swivels on a screw and hooks on to a screw on the other half of the table
geoff

Posted: Fri Dec 14, 2007 11:31 am
by dewaltdisney
Have a look at Issac Lord

This is what you might need http://www.isaaclord.co.uk/productDetai ... subCat=000

It might need countersinking though

DWD

Posted: Fri Dec 14, 2007 3:23 pm
by geoffg
Cheers DWD,
Couldn't find what I wanted, so I had a look round B&Q and got some toggle clips. Now fitted and working superbly
cheers again for the replies
geoff :grin: