1/2" rebate cutter with full set off depth cut bearings
Posted: Sun Nov 03, 2013 12:56 am
not the cheapest but if you are new to routing reasonable value for a full set off bearings that will give you a fairly full rebate width variation
the bearings will also fit a 1/4 inch tornado rebate cutter and possibly most rebate cutters
http://www.rutlands.co.uk/sp+woodworkin ... ornado+tr7
the bearings will also fit a 1/4 inch tornado rebate cutter and possibly most rebate cutters
http://www.rutlands.co.uk/sp+woodworkin ... ornado+tr7