Page 1 of 1
Warped WBP Ply for bath panel
Posted: Mon Dec 16, 2013 8:46 pm
by colouredFunk
Hi all,
I recently bought a sheet of WBP ply, in hope to tile my bath panel. But when I brought it home I realised its slightly wrapped/concaved!
It's my understanding the this Marine ply shouldn't warp at all, and hence why it's good to use for bath panels...
Annoying I got B&Q to cut it before I bought it so not sure if I can return it...
But am I right, this stuff shouldn't warp?
Re: Warped WBP Ply for bath panel
Posted: Mon Dec 16, 2013 9:07 pm
by steviejoiner74
Some of the materials b&q sell are of shocking standard,the way they stack materials is poor as well. Any sheet material will warp if it's stored incorrectly. Go to a local timber merchants for materials in future,better quality and cheaper
Re: Warped WBP Ply for bath panel
Posted: Mon Dec 16, 2013 9:10 pm
by darrenba
WBP ply is not the same as Marine ply
Make up a 2x2 frame and screw the ply to it. I tend to use cement board for bath panels these days
Re: Warped WBP Ply for bath panel
Posted: Mon Dec 16, 2013 9:13 pm
by ayjay
WBP is not the same as Marine ply.
Marine ply will cost you at least double what WBP would; probably treble the price of the warped stuff.
I don't think WBP is guaranteed not to warp, but if it's fixed to a good framework it should remain stable.
Re: Warped WBP Ply for bath panel
Posted: Tue Dec 17, 2013 10:18 pm
by transitboy
darrenba wrote:WBP ply is not the same as Marine ply
Make up a 2x2 frame and screw the ply to it. I tend to use cement board for bath panels these days
As long as you don't buy the 2 x 2 from b & poo
Re: Warped WBP Ply for bath panel
Posted: Tue Dec 17, 2013 10:29 pm
by Mooncat
Marine ply has no joins in the outer layers, and no voids in the others.
Re: Warped WBP Ply for bath panel
Posted: Tue Dec 17, 2013 10:35 pm
by Timllfixit
I notice the stuff in Wickes comes from China!
I imagine B&Q is the same(only worse......?)
Re: Warped WBP Ply for bath panel
Posted: Tue Dec 17, 2013 10:51 pm
by royaloakcarpentry
The BandPoo stuff is also probably cheap Chinese shite. It also has delamination problems.
You get what you pay for!
Re: Warped WBP Ply for bath panel
Posted: Wed Dec 18, 2013 2:00 pm
by colouredFunk
Thanks for all the replies and advice.
The chump in B&Q said WBP was marine ply.... Going to see if I can take it back and get a refund!
Re: Warped WBP Ply for bath panel
Posted: Wed Dec 18, 2013 2:48 pm
by wine~o
colouredFunk wrote:Thanks for all the replies and advice.
The chump in B&Q said WBP was marine ply.... Going to see if I can take it back and get a refund!
Good luck with that..
Re: Warped WBP Ply for bath panel
Posted: Wed Dec 18, 2013 5:32 pm
by steviejoiner74
The chumps in bq are useless,i know someone who works in a store who is the resident 'expert' giving demos on tools etc. he was on the dole for yonks and one of the reasons he was given the job was because he had laid a few laminate floors....i kid you not.