OSB manufacturers....
Posted: Tue Apr 22, 2014 3:07 pm
...if you can be arsed to print all your manufacturing data all over the board, why can't you print lines at 400mm and a centre line down the board at the same time?
www.ultimatehandyman.co.uk
DIY Forum/Home improvement advice forum
https://ultimatehandyman.co.uk/forum1/
OSB manufacturers....
Page 1 of 1
Re: OSB manufacturers....
Posted: Tue Apr 22, 2014 3:28 pm
Because then if it's wrong you can blame the manufacturer if it's cut incorrectly
Re: OSB manufacturers....
Posted: Tue Apr 22, 2014 5:11 pm
Drawing centre lines on osb is a fcuking killer 
Re: OSB manufacturers....
Posted: Tue Apr 22, 2014 5:30 pm
Norbord
Re: OSB manufacturers....
Posted: Tue Apr 22, 2014 5:49 pm
182michael wrote:Drawing centre lines on osb is a fcuking killer
totally!!!Notice its never 1200 wide now either,more like 1190x2395
Re: OSB manufacturers....
Posted: Tue Apr 22, 2014 6:10 pm
1197x2397 is the official size now because your meant to leave 3mm between boards. MGM had some info about it in store.
You buying seconds at 1190?
You buying seconds at 1190?
Re: OSB manufacturers....
Posted: Tue Apr 22, 2014 8:04 pm
one of the factories is between home & Inverness, pass it every day