Tiling onto odd bits of wood.
Posted: Mon Aug 25, 2014 3:23 pm
Hi guys, I put in a vanity unit into a bed room and have a very small bit of tiling to do for a small shelf and gap between the wall and unity and a bit around walls. Total area is about 1.5 ~2sqm I just used an old floor board and odd piece of pine I have left over as the surface to be tiled on. Its well solid but wondering can I just use a dash of PVA to prime the boards. Didn't really want to get a tub of SBR for the tiny amount of tiling and have PVA sitting about. It should never get too wet but I suppose pools of water can sit on it.
Also, I am thinking of using this Adhesive and grout I realize its crap but given how small of an area I have to do, i'd rather try avoid buy large bags of separate adhesive and grout. It will end up in the bin afterwards. Will it do the job?
Also, I am thinking of using this Adhesive and grout I realize its crap but given how small of an area I have to do, i'd rather try avoid buy large bags of separate adhesive and grout. It will end up in the bin afterwards. Will it do the job?