bodged

This is where you can post pictures of extremely poor workmanship, whether it is done by a dodgy tradesman or by an incompetent DIY'er. Instructions on how to post pictures can be found in here.

Moderator: Moderators

Post Reply
Hinton Heating
Gas/Heating Expert
Posts: 4382
Joined: Mon Jan 16, 2006 9:40 pm
Location: Bournemouth
Has thanked: 0
Been thanked: 9 times

bodged

Post by Hinton Heating »

how to clear an air lock... just use mains pressure to clear & bypass the tank..

No pressure relief valve
No expansion vessel
No pressure gauge

Cold main connected to open vent.
Cold feed capped further back.

Image
Top
Hinton Heating
Gas/Heating Expert
Posts: 4382
Joined: Mon Jan 16, 2006 9:40 pm
Location: Bournemouth
Has thanked: 0
Been thanked: 9 times

Post by Hinton Heating »

after a slight modifiaction.

(PRV is above boiler at low level, and pipes lagged after photo taken.)

Image
Top
Post Reply

Return to “Rogues Gallery”