Dekton tools?
Moderator: Moderators
-
- Newly registered Member
- Posts: 16
- Joined: Wed Oct 28, 2009 12:28 pm
- Location: England
- Has thanked: 1 time
- Been thanked: 3 times
Dekton tools?
Hi, anyone out there ever heard of/used Dekton tools? and yes that is Dekton, not the more popular Tekton, can't seem to find any history or feedback on these cheap but good looking tool's, I would be very interested in any comment's/feedback you have to offer,
Thank's, Tony.
Thank's, Tony.
-
- Senior Member
- Posts: 5375
- Joined: Wed Feb 26, 2014 9:35 pm
- Has thanked: 108 times
- Been thanked: 1038 times
Re: Dekton tools?
I've seen them about. Look similar to Rolson/Blakspur etc, in fact aside from colour some of the tools are identical even down to the packaging. I have bought a couple of bits and for the money they were ok, perfect for a one off job/backup.
-
- Newly registered Member
- Posts: 16
- Joined: Wed Oct 28, 2009 12:28 pm
- Location: England
- Has thanked: 1 time
- Been thanked: 3 times
Re: Dekton tools?
I'm also trade (45 years) but Dekton were a name I heard mentioned by a fellow trader for possible "single use only" while on site, ie tape measures etc, I don't know about you but I can't afford to keep replacing my best gear just because some thieving little runt takes a shine to my possesions.
-
- Senior Member
- Posts: 129
- Joined: Tue Jan 05, 2016 8:30 am
- Location: London
- Has thanked: 58 times
- Been thanked: 18 times
Re: Dekton tools?
at first it felt like one of those chinese copies, but it turned out to be a well established uk brand
- Job and Knock
- Old School Chippie
- Posts: 6667
- Joined: Mon Sep 12, 2011 3:27 pm
- Has thanked: 742 times
- Been thanked: 1573 times
Re: Dekton tools?
No, you were right first time - it IS a firm selling cheap Chinese copies......DmitriKara wrote:at first it felt like one of those chinese copies, but it turned out to be a well established uk brand
- These users thanked the author Job and Knock for the post:
- DmitriKara
- Rating: 7.14%
"The person who never made a mistake, never made anything" - Albert Einstein
"I too will something make, And joy in the making" - Robert Bridges, 1844~1930
"The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt.” - Bertrand Russell from The Triumph of Stupidity", 1933
"I too will something make, And joy in the making" - Robert Bridges, 1844~1930
"The fundamental cause of the trouble is that in the modern world the stupid are cocksure while the intelligent are full of doubt.” - Bertrand Russell from The Triumph of Stupidity", 1933
-
- Newly registered Member
- Posts: 16
- Joined: Wed Oct 28, 2009 12:28 pm
- Location: England
- Has thanked: 1 time
- Been thanked: 3 times
Re: Dekton tools?
Job & Knock, yes but my original question was are they any good as "one use" throwaway jobbies? as I am sick of so called pro's on the job who can't keep their thieving hand's too themselves too the point where I only use the majority of my good gear on private jobs?
Tony.
Tony.
-
- Senior Member
- Posts: 129
- Joined: Tue Jan 05, 2016 8:30 am
- Location: London
- Has thanked: 58 times
- Been thanked: 18 times
Re: Dekton tools?
Job and Knock wrote:No, you were right first time - it IS a firm selling cheap Chinese copies......DmitriKara wrote:at first it felt like one of those chinese copies, but it turned out to be a well established uk brand
I've never understood how could people fall for the same trick over and over again.. It's the same with clothing, although power tools are Waaay more dangerous... Risky chinese products are definitely not my cup of tea.
-
- Newly registered Member
- Posts: 16
- Joined: Wed Oct 28, 2009 12:28 pm
- Location: England
- Has thanked: 1 time
- Been thanked: 3 times
Re: Dekton tools?
I agree, but we're only talking tape measures, craft knives, screw boxes etc, the small stuff that usually "goes walkies" on site, tool snobbery doesn't come into it when they fancy your gear they think might come in handy that you've only left for a minute or two, and why does it seem accepted when your gear goes missing, all I hear is "its your own fault for leaving it unattended"? they should have their fingers chopped off, THEFT IS THEFT, if you steal other peoples property YOUR A THIEF.
- ayjay
- Senior Member
- Posts: 9891
- Joined: Wed Nov 17, 2010 5:51 pm
- Has thanked: 458 times
- Been thanked: 1708 times
Re: Dekton tools?
I wouldn't stop at their fingers!TPT.50 wrote:.......................why does it seem accepted when your gear goes missing, all I hear is "its your own fault for leaving it unattended"? they should have their fingers chopped off, THEFT IS THEFT, if you steal other peoples property YOUR A THIEF.
But it is your fault to some extent, you know they exist, don't give them the opportunity and you'll still have your tools.
In 50 years a chippie:
Stolen: all my Jennings pattern Ridgeway auger bits from 1/4 to 1/2 in 1/16ths (he left the larger sizes) - I know who it was, couldn't prove it, my fault, I even showed him where I stashed my tools at night, (I was young, I learnt from that and never again left my tool on-site).
Stolen: My expensive Stabila level, mistakenly left behind a door one holiday weekend, (my fault), I know who it was but couldn't prove it, stolen by the labourer who was sacked that Friday - he came back and nicked only builders stuff - all of the house-owners stuff was untouched.
I've been fortunate that I've never had my van turned over, but also cautious about where I park, even turning down many jobs because of a lack of sensible parking. I've met others who are into double figures for the number of times they've had everything of value removed from their vans - to me that sounds careless rather than unlucky.
One day it will all be firewood.
-
- BANNED
- Posts: 698
- Joined: Fri Jul 10, 2015 5:29 am
- Has thanked: 125 times
- Been thanked: 115 times
Re: Dekton tools?
I agree with the finger-chopping but reckon the best way is three times caught and you are hung. Once for paedophiles, twice for assault, burglary etc, three times for light theft. We won't need jails or screws (many are bent). The chopping and hanging should be in public and their organs donated to science.
-
- Senior Member
- Posts: 5063
- Joined: Wed Feb 25, 2015 7:20 pm
- Has thanked: 1300 times
- Been thanked: 1175 times
Re: Dekton tools?
And that's nearly always the problem. You know exactly who it is, but there's no chance of proving it.ayjay wrote:- I know who it was, couldn't prove it, my fault, -TPT.50 wrote:.......................why does it seem accepted when your gear goes missing, all I hear is "its your own fault for leaving it unattended"? they should have their fingers chopped off, THEFT IS THEFT, if you steal other peoples property YOUR A THIEF.
And even if you could, what then? These days it'd be you who was in the wrong if you did anything in retribution, but of course the police wouldn't do anything about the theft either. No win as usual.
"They" will nick stuff whether it's cheap or not given the opportunity. If I had to work on site now, I think I'd go down the route of roughly spraying anything likely to likely to get lifted with a bright fluorescent colour. Make it less shiny for the magpies.
As a complete aside, a bit of a mystery. I had some good friends who were on holiday down here in my workshop showing them what I was working on. Afterwards a small home-made gauge had disappeared off the bench. Nothing really, of no value except a few minutes to make. Did they take it? I'll never know, but if they did. Why?
-
- Senior Member
- Posts: 5063
- Joined: Wed Feb 25, 2015 7:20 pm
- Has thanked: 1300 times
- Been thanked: 1175 times
Re: Dekton tools?
There'd be no begger left in some places. . . !jape wrote:I agree with the finger-chopping but reckon the best way is three times caught and you are hung. Once for paedophiles, twice for assault, burglary etc, three times for light theft. We won't need jails or screws (many are bent). The chopping and hanging should be in public and their organs donated to science.
- Argyll
- Senior Member
- Posts: 6145
- Joined: Wed Sep 10, 2008 3:58 pm
- Has thanked: 1180 times
- Been thanked: 576 times
Re: Dekton tools?
Are they? What experience do you have of jails?jape wrote:We won't need jails or screws (many are bent).
- steviejoiner74
- Senior Member
- Posts: 8005
- Joined: Sun Aug 18, 2013 7:04 pm
- Location: Fife
- Has thanked: 747 times
- Been thanked: 1616 times
Re: Dekton tools?
It's not the tooth fairy that brings in all the drugs,mobile phones etc is it?Argyll wrote:Are they? What experience do you have of jails?jape wrote:We won't need jails or screws (many are bent).
The ITV program on wermwood scrubs interviewed loads of cons who said it was 500 quid a package the screws charged,and there was loads of them willing to take gear in.
Inmates openly smoking dope on camera that the screws turned a blind eye to. The list goes on.
- These users thanked the author steviejoiner74 for the post:
- jape
- Rating: 7.14%
Carpentry,I can explain it to you but I cannot understand it for you.