www.ultimatehandyman.co.uk

Whats the best diamond drill bits for drilling holes in porcelain tiles? Need to do around 30 holes.

Sent from my SM-G901F using Tapatalk

What size of hole and what is the hole for?

Shower fixing kit, shower rail, shower screen, toilet to floor, vanity basin unit, towel radiator. Size of hole to fit a red wall plug.

Sent from my SM-G901F using Tapatalk

In that case then try this,I've used this before and it performed a lot better than more expensive brands by some distance.

I tend to get my diamond drills from my local tiling shop for about 1/2 that price. To get the best life out of diamond drills you need to make sure you don't get them too hot.

By far the most cost effective solution - http://www.atsdiamondtools.co.uk/node/12

You'll get 15-20 holes out of each bit if you use them correctly, even more if you look after them.

Colour Republic wrote:By far the most cost effective solution - http://www.atsdiamondtools.co.uk/node/12

You'll get 15-20 holes out of each bit if you use them correctly, even more if you look after them.

Thanks for the link I very rarely have to drill into tiles but at that price I'm going to buy a few sizes for future use. Great value for money!

Thank you for link, ordered from ats.

Sent from my SM-G901F using Tapatalk

darrenba wrote:I tend to get my diamond drills from my local tiling shop for about 1/2 that price. To get the best life out of diamond drills you need to make sure you don't get them too hot.

It says on their website that you can hold a wet sponge against the drill bit to keep cool, how is this acheived as not sure?

Colour Republic wrote:By far the most cost effective solution - http://www.atsdiamondtools.co.uk/node/12

You'll get 15-20 holes out of each bit if you use them correctly, even more if you look after them.

Sent from my SM-G901F using Tapatalk

Bump

Sent from my SM-G901F using Tapatalk