First tile gap round bath and trim advice

[Morbius]

Hi, bath is fitted and i would like to know if the first row of tiles should be right down to the bath or a slight gap left for silicone. This is assuming i have checked the layout of tiles up to ceiling to avoid thin cuts of course. Can i start on the second row of tiles first with the aid of a batten to strike off and fit the first row after?.
Also, i know that a slight gap should be left at ajoining walls, but what about at the ceiling?.
On the subject of tile trims i am having border tiles with a metal strip either side. Do the trims need a gap at walls or should they be butted up?. Cheers for any help.

[wine~o]

Hi, bath is fitted and i would like to know if the first row of tiles should be right down to the bath or a slight gap left for silicone.

Are you using tile spacers ? if so allow the same gap at the bath rim..

Can i start on the second row of tiles first with the aid of a batten to strike off and fit the first row after?.
.

Yes. but do check your spacings.

Also, i know that a slight gap should be left at adjoining walls, but what about at the ceiling?.
.

again a 2/3 mm gap...

On the subject of tile trims i am having border tiles with a metal strip either side. Do the trims need a gap at walls or should they be butted up?. Cheers for any help.

If I understand you correctly then butt up with a tiny gap ... like 0.2 mm either end.

[Morbius]

No need to mitre the trim in corners then, just leave a tiny spacing with straight edges?. cheers.

[wine~o]

Mitre will always look more professional..

[steviejoiner74]

Mitre will always look more professional..

Agree,a butt joint looks amateurish. However a tidy butt is better than a messy mitre

[darrenba]

If it's trim either side of a border tile then no need to mitre internal corners. If the trim is hiding the edge of a tile such as around a window or a top edge then yes mitre the joints.

I assume you are doing something like this

IMG_3781.jpg (249.62 KiB) Viewed 1970 times