Mrs A is convinced that the router shouldn't be anywhere near the TV, likewise the cordless telephone. I am sure that they are all on different wavelengths and there shouldn't be any conflicts.
I am about to rearrange wiring and sockets in the living room and having router & phone on a shelf by the TV would be a far better arrangement than at present.
Would someone with more knowledge on the subject please confirm whether this would be OK.
Router location
Moderator: Moderators
- 54aardvark
- Senior Member
- Posts: 1339
- Joined: Thu Jan 10, 2008 5:53 pm
- Location: MONTROSE
- Has thanked: 16 times
- Been thanked: 56 times
-
- Senior Member
- Posts: 17256
- Joined: Fri Jan 20, 2006 5:51 pm
- Location: Essex
- Has thanked: 823 times
- Been thanked: 3556 times
Router location
I am not an electronics expert but I have a router, cordless phone and TV all together and I have never noticed any problems at all. If it is an issue for you can use the TP links which use the household wiring system to send data from one point in the house to another. I have one connecting my Sky box to the Ethernet connections linked to the router in another room and it is fine. See Dead link removed by Admin 26/01/2022
DWD
DWD
- These users thanked the author dewaltdisney for the post:
- 54aardvark
- Rating: 7.14%
- Someone-Else
- Senior Member
- Posts: 14707
- Joined: Sat Sep 01, 2012 6:03 pm
- Has thanked: 47 times
- Been thanked: 2590 times
Re: Router location
Routers are on 2.4 or 5 ghz
Cordless phones are 1.88 - 1.99 ghz
TV is in the mhz range
So, there should be no conflict what so ever. (If there were you would have noticed by now)
Cordless phones are 1.88 - 1.99 ghz
TV is in the mhz range
So, there should be no conflict what so ever. (If there were you would have noticed by now)
- These users thanked the author Someone-Else for the post:
- 54aardvark
- Rating: 7.14%
Above are my opinions Below is my signature.
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.
If gloom had a voice, it would be me.
Click Here for a video how to add/change pictures
Inept people use the QUOTE BUTTON instead of the QUICK REPLY section
- 54aardvark
- Senior Member
- Posts: 1339
- Joined: Thu Jan 10, 2008 5:53 pm
- Location: MONTROSE
- Has thanked: 16 times
- Been thanked: 56 times
Re: Router location
Thanks for that, should be enough to convince Mrs A!
There are no problems - only solutions
-
- Senior Member
- Posts: 4806
- Joined: Thu Apr 14, 2011 6:33 pm
- Location: Dundee, Scotland.
- Has thanked: 855 times
- Been thanked: 994 times
Re: Router location
There again maybe not ... My ISP suggested that I move the router 1 metre away from the phone base as I had too much noise on the line. See this too: https://www.ic.co.uk/support/knowledgeb ... -problems/
- Timllfixit
- Senior Member
- Posts: 1423
- Joined: Wed Feb 29, 2012 3:41 pm
- Location: Wiltshire
- Has thanked: 146 times
- Been thanked: 209 times
Re: Router location
Someone-else is right, but Broadband frequencies cover radio frequencies( new G fast will approach VHF!) so in some cases RF interference can interfere with the broadband itself, before it gets to your router, so your SP has a point. Presumably the reverse is also true.
Openreach/BT SFI(special faults investigation) sometimes use portable radios to find sources of interference if they suspect that said interference may be affecting the customers broadband.
Openreach/BT SFI(special faults investigation) sometimes use portable radios to find sources of interference if they suspect that said interference may be affecting the customers broadband.
When all you have is a hammer, every problem is a nail.