Encaustic cement tiles on wall, adhesive thickness
Posted: Thu Jul 13, 2017 8:17 pm
Hello, very grateful for any help. I have some encaustic cement tiles 13mm thick that I want to use as a splash back, 1m x 1m behind a cooker.
What thickness of adhesive should I allow as I want to put a tile trim on the edge , I am thinking an 18mm straight edge trim will be sufficient, ie, 5mm of adhesive.
Also what ready mixed adhesive would anyone recommend for this type of tile.
What thickness of adhesive should I allow as I want to put a tile trim on the edge , I am thinking an 18mm straight edge trim will be sufficient, ie, 5mm of adhesive.
Also what ready mixed adhesive would anyone recommend for this type of tile.