Page 1 of 1
Building fitted sliding wardrobe frame
Posted: Mon Aug 20, 2018 9:10 pm
by kevinsmbuk
I'm fitting some sliding wardrobe doors into this opening. The plan is to plasterboard most of it apart from the side which has a side panel in the same colour as the wardrobe doors. Can I ask have I built it properly? Just a bit concerned the plaster may crack if there is movement in the wood frame with the slats running down it when the wardrobe doors close against it.
![Image](https://uploads.tapatalk-cdn.com/20180820/0a761e667bbc9bf9d1d3ca5caa23c4cf.jpg)
Sent from my SM-G950F using Tapatalk
Re: Building fitted sliding wardrobe frame
Posted: Tue Aug 21, 2018 7:09 am
by Grendel
I've constructed wardrobes like that but have tended to use mdf rather than plasterboard . I take it that it's the inside of the right hand frame you are talking about plasterboarding ?
Re: Building fitted sliding wardrobe frame
Posted: Tue Aug 21, 2018 11:36 am
by kevinsmbuk
Grendel wrote:I've constructed wardrobes like that but have tended to use mdf rather than plasterboard . I take it that it's the inside of the right hand frame you are talking about plasterboarding ?
I would be plasterboarding/plastering pretty much all of it apart from the right hand side which will have an end panel.