www.ultimatehandyman.co.uk

Wonder if anyone can possibly help me with this one.
I have a Honda GV100 motor fitted to my Omega mower and am desperately trying to find a set of gaskets for the carb.
I've tried all of my local shops and service people but no one has any and say they are not available.
Does anyone know where I can source them and also a drawing to understand how they all fit in sequence.
You guys are my last chance!!!!!!!

Yes I bought a set from Amazon. I am not sure of my motor was a GV100 and I think they were for a GV 135 but they fitted. Sometimes it pays to buy a complete carburettor which comes with gaskets as they are so cheap. Have a look on Amazon and see if the carb unions and bolt holes are the same.

DWD

Thanks DWD I'll take a look

The bigger models are ever so slightly different

If you have the part numbers a honda motorcycle dealer should be able to get them

16212896306 or 16212-896-306
16226896750 or 16226-896-750
16010896015 or 16010-896-015 (previous part No. 16010896005)

search the above numbers here https://www.lsengineers.co.uk/light-pla ... honda.html

Thanks Bob I've just e-mailed them although not sure what ones I should order

You can buy gasket paper and make your own if you have no luck sourcing replacement gaskets

I got the parts numbers from here https://www.cmsnl.com/honda-gv100gs1089 ... YZC7WbTVPY (based in Holland)

I would of said gasket paper too, but one of them has a metered hole iirc

Ah its a Mountfield

Hi Bob yes it's amountfield fitted with this Hoda motor, I'm even talking to Honda them selves now to try to get hold of the gaskets.

Hi, Im just wondering did you manage to source them in the end? if so where from? im in need of some myself so any help would be great thanks. much appreciated

See my posts above, you will need the engine number, what gaskets do you need

Iirc the GV100 is the same as the GS100