That gate, finished.

[Jaeger_S2k]

I've finished the gate that was broken. Some intervention on some filler of screw holes that weren't rubbed down but was asked just to paint as is. So I did, all my filling was rubbed down.

Here's the gate as it started out posted on the Carpentry/Joinery Forum

I also asked about stays but couldn't find a suitable and quick solution so you'll see what was done with chain, an eye and a d-clip and a bolt, nut and 3 washers, works well.

The worst gate was the one that had been whipped round the end post by the wind and buckled, it was dismantled and rebuilt....

4721773530_016e92355a_b.jpg (410.14 KiB) Viewed 1688 times

4721775230_07d6ed3b60_b.jpg (79.6 KiB) Viewed 1688 times

It wasn't hard to take apart, it wasn't glued well and the cross bars weren't attached to the frame! They were attached to the T & G.

4721156061_d5e22819c5_b.jpg (98.79 KiB) Viewed 1688 times

Cleaned up the edges and frame.

4721126315_2ce00be619_b.jpg (102.3 KiB) Viewed 1688 times

The Jigsaw, I did number and mark the pieces to put them back in the same order.

4721158055_a35545d2f4_b.jpg (114.72 KiB) Viewed 1688 times

The frame upright was badly split, I pulled it together, glued, clamped and screwed back together.
The dowels weren't glued, and the snapped ones I cut back clamped in position and countersunk some screws through the frame parts.

4722544378_d405ea6bf6_b.jpg (61.29 KiB) Viewed 1688 times

4721159301_3fbf52eac0_b.jpg (86.47 KiB) Viewed 1688 times

4721128237_337401a221_b.jpg (80.24 KiB) Viewed 1688 times

4721779964_e5b45fcf71_b.jpg (75.98 KiB) Viewed 1688 times

4721122083_a90e0dfc6f_b.jpg (74.59 KiB) Viewed 1688 times

4721122317_b24d3aca1b_b.jpg (75.56 KiB) Viewed 1688 times

4721774006_879a0c547c_b.jpg (59.24 KiB) Viewed 1688 times

I rebuilt with clamps, glue and skew brad nailed and screws.
Good coat of Johnstone Oil based undercoat, 1 coat of Weathershield Exterior Undercoat, 1 Weathershield Exterior Satin

4721900153_4f18bd2a4b_b.jpg (72.54 KiB) Viewed 1688 times

4722600066_cd9d0a7879_b.jpg (74.37 KiB) Viewed 1688 times

4721898281_16f88c3f77_b.jpg (41.47 KiB) Viewed 1688 times

4721902259_5f6e2b430b_b.jpg (69 KiB) Viewed 1688 times

4721903459_20f63e772c_b.jpg (72.51 KiB) Viewed 1688 times

4721905121_6aae2a7ab8_b.jpg (51.48 KiB) Viewed 1688 times

4722558156_8ea82b813b_b.jpg (46.23 KiB) Viewed 1688 times

4722564180_b64788f3f7_b.jpg (60.93 KiB) Viewed 1688 times

4721909057_04ef394571_b.jpg (62.55 KiB) Viewed 1688 times

The gates can't blow beyond 90 degrees but can be unhooked form the eye with the d-clip to open fully under control.

Client is pleased considering.

[thescruff]

Looks good.

[wine~o]

looks like a new gate..

[skiking]

Nice

[ultimatehandyman]

Nice work

[marc1106]

good job Jeager

[Jaeger_S2k]

Cheers all.
The nice thing is it'll remain nice and bright white for some time as it's acrylic.

Client is pleased, neighbours have commented on how nice his 'new' gates are!

One thing that did bother me, the hasp and handle, when I fitted them absolutely level to eye, which was really level. The hasp wouldn't ride up the striker and drop nicely (if you look you'll see they are slightly out of line).

Is this normal or did I miss something?

[thescruff]

Should have nailed your trade board on one

[Alice]

Very nice work indeed,

[EJJ150847]

Looks very nice

John

[Cannyfixit]

Excellent work they look like new now