Hi, we are installing a stove in a new build and I'm looking for some design advice.
The stove is to be located in a purpose built corner alcove approx 5ft high and 3ft wide.
We are looking for suggestions on how to finish the surround. The stove will set set on a plinth approx 9 inches high. We have been thinking about tiles, but there is disagreement on whether to put a tile surround around the front of the alcove. There is concern that a tile surround night look a bit dated. The thought is the tiles will be a marble effect.
Any suggestions (and images) to show what we could do here?
From looking on Google most corner stoves are not put into alcoves and have an exposed pipe to the ceiling.
What are peoples thoughts?
If there is a better forum to ask this question, please let me know!
Thanks.
Stoves surrounds
Moderator: Moderators
-
Father Ted
- Senior Member
- Posts: 164
- Joined: Mon Sep 16, 2013 8:24 pm
- Has thanked: 30 times
- Been thanked: 2 times
-
Barry_Convex
- Newly registered Member
- Posts: 58
- Joined: Fri Jul 07, 2017 9:59 pm
- Has thanked: 5 times
- Been thanked: 15 times
Re: Stoves surrounds
Pinterest is much better than Google for this.
Sent from my D5803 using Tapatalk
Sent from my D5803 using Tapatalk
-
Bowland Stoves
- Stoves expert
- Posts: 13
- Joined: Mon Sep 18, 2017 9:58 am
- Has thanked: 0
- Been thanked: 3 times
Re: Stoves surrounds
Good Morning
Whatever you decide to line your alcove with it needs to be made of a non-conbustable material.
A grey slate tile might be nice. Or you could just plaster it and paint to go for a very minimal look.
Alternatively you could have open brick or stone behind the stove.
Hope this gives you a few ideas
Whatever you decide to line your alcove with it needs to be made of a non-conbustable material.
A grey slate tile might be nice. Or you could just plaster it and paint to go for a very minimal look.
Alternatively you could have open brick or stone behind the stove.
Hope this gives you a few ideas