Sealey VS8650/ Autel EU702 Software update file for Vauxhall

[malenick]

Hi there, can somebody send me a software update for Sealey VS8650 or Autel EU702 ( older version not MaxiDiag) try to find on the net but unsuccesful, if anybody has got ( or had ) one of this scanner and still have downloaded update please send me file to my email.

[Bob225]

you have to update the sd card in the autel software on a pc, I only have the Maxi Das and Maxi Check pro

http://support.autel.com/support/home

what are you trying to do ? what model, year and engine ?

[malenick]

Well that's the problem, Autel does not support this any more, this is actually Sealey, but is made by Autel, it's same model as MaxiDiag EU702 ( did serch on net it is MaxiDiag) Autel as most american businesses, supports their products for two years only, then need to replace old product for a newer one , this is few years old so there is no support either on Sealey or Autel. I need to test and then change VIN number in rear fuse box, which I think I need to change. It's Vauxhall Astra 1.4 SXI 2006, engine Z14XEP, the software I have with the tool doesn't have this engine number, so can't connect to ECU. for this year and this model it only has 1.8 and 1.9 enginees.

[Bob225]

Well you cant do the vin change with a low end scan tool (most tools under £600 will not do bi directional coms) - you can with a tech2/clone or a VX Diag (GM), 2006 makes it a Astra H iirc that should be in the bcm if so you will need access tis2web and the software downloads for your VIN and re-flash it

manually select the car with the autel and select it as a Corsa that will read the ecu and bcm


iirc autel is a Chinese company the same as launch