berlingo mulispace

Mick Coleman · Post by **Mick Coleman** » Fri Feb 15, 2008 2:04 pm

hi
im looking for a second hand spare wheel for my berlingo mulispace,
mine has been nicked from under the car.

im in solihull west midlands

tryed the scrap yards no good,

thanks

Hitch · Post by **Hitch** » Fri Feb 15, 2008 6:51 pm

Is it only a steel rim with trims?

I could have helped you out not so long ago

If its only a steel, a rim from a berlingo van will be the same, or peugeout partner combi, or partner van.

5.5J x 14" 4x 108mm PCD, 65.1mm centre bore

You need a rim which matches this, 14" being the diameter, the 5.5J, being the offset to the centre line of the rim to the inside mouting face.
PCD being the diameter of circle the holes are based on.

A whole host of other citroen/peugeot rims will fit it. Pug 405 or citroen xantia would be a very likely candidate id imagine. Most citroens/Pugs will have the 108mm pcd and 65.1 bore.

Hoovie · Post by **Hoovie** » Fri Feb 15, 2008 6:55 pm

IIRC, Vauxhall and PSA (Peugoet/Citroen) have the same wheel configuation (PCDs/ Centres).

Hitch · Post by **Hitch** » Fri Feb 15, 2008 7:00 pm

Vauxhall use 110 or 100 with a smaller centre bore on a fair few.

Hitch · Post by **Hitch** » Fri Feb 15, 2008 7:01 pm

Ford use 108s on quite a few, but again a smaller centre.