Bathroom floor
Moderator: Moderators
-
Detector
- Newly registered Member
- Posts: 7
- Joined: Tue Feb 12, 2019 1:24 pm
- Has thanked: 0
- Been thanked: 0
Bathroom floor
Hi my son in law is going to be tilling there bathroom &twant to make sure the floor will be ok to tile . He's taken the old floorboards up & replaced with 3/4 ply as long as that is screwed down will that be ok or does he have to put ply on top and screw every 6 in as I've seen on videos , he will then use a flexible tile adevsive , many thanks
-
wine~o
- Senior Member
- Posts: 26265
- Joined: Sat Jan 10, 2009 3:49 pm
- Location: hants/dorset border
- Has thanked: 1414 times
- Been thanked: 4015 times
Bathroom floor
He;ll need to prime the ply with something like BAL SBR before tiling. Other than that, goog to go.
Verwood Handyman
_____________________________________________________________________________
If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :
http://www.donnasdreamhouse.co.uk
_____________________________________________________________________________
If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :
http://www.donnasdreamhouse.co.uk