Galvanised Steel Trim Bent

Amo42 · Post by **Amo42** » Fri Apr 15, 2022 6:26 pm

Hi. I have a field shelter that got flipped upside down in the last round of storms. We have got it back together now but some of the edge trims have been bent or dented in places. They are galvanised steel apparently. Does anyone have any ideas on how we can straighten them ourselves?
Thanks

dewaltdisney · Post by **dewaltdisney** » Fri Apr 15, 2022 6:41 pm

How long and thick are the trims?

DWD

Amo42 · Post by **Amo42** » Fri Apr 15, 2022 6:48 pm

Off the top of my head they are 5ft long, a U shape (they go over the step into the shelter) and about 5mm thick I’d say.
Thanks

dewaltdisney · Post by **dewaltdisney** » Fri Apr 15, 2022 9:12 pm

Have a look to see if they have the size you need https://hardware-warehouse.co.uk/u-channel

DWD