Multiple items from fused spur on the ring

Super_paulie · Post by **Super_paulie** » Thu Sep 08, 2022 1:37 pm

hi guys. Quick question that i cant seen to find an example of online.

Got a fused spur as part of the main ring then 2 items on the load side of it, the boiler and the small "heat link" thermostat controller. Apart from being a tight fit in the spur due to the 4 cables, is this legit? See attached.

Cheers guys.

: boiler.JPG (24 KiB) Viewed 451 times

Neelix · Post by **Neelix** » Thu Sep 08, 2022 2:08 pm

Actually that’s the way to do it, then there is a single point of isolation for both items

Super_paulie · Post by **Super_paulie** » Thu Sep 08, 2022 2:17 pm

thanks Neelix, i thought as much but was just in the back of my mind to check. Cheers.