I had architraves replaced around home internal doorways, the original paint on the framing that remained is a slightly 'yellower' white than the new architrave. I need to touch up as we're selling the house. Just wondering what primer to use. I don't know what type of paint is currently on the frames. I bought Zinsser Peel Stop to use around the exposed edges on walls after sanding (the new architrave is narrower than old). I gather I really need a high bonding primer. Was thinking about Zinsser Bin? But they're quite expensive so don't want to go wrong and short on time so no room for error.
Any (qualified/experienced) ideas welcomed.
Thanks.
Correct Primer For Doorframes
Moderator: Moderators
-
premierdecorators
- Newly registered Member
- Posts: 5
- Joined: Thu Oct 10, 2024 12:30 pm
- Has thanked: 0
- Been thanked: 1 time
Correct Primer For Doorframes
Here are some tips and recommendations for touching up the paint around your internal doorways:
1. Assess the Current Paint
Since you're unsure what type of paint is currently on the frames, it’s best to determine if it’s latex or oil-based. You can do this by applying a small amount of rubbing alcohol or acetone to a cotton ball and rubbing it on the paint. If it comes off, it's latex; if it doesn’t, it’s likely oil-based.
2. Primer Recommendations
Zinsser B-I-N: This is an excellent choice for a high-bonding primer. It’s a shellac-based primer, which adheres well to glossy surfaces, prevents bleed-through from stains, and works for both latex and oil-based paints. It's a bit more expensive, but it’s worth it for the quality and quick drying time, especially when you’re on a tight schedule.
Zinsser 123: If you want to save a bit and still have a good bonding primer, consider Zinsser 1-2-3. It’s a water-based primer that adheres well to various surfaces, is stain-blocking, and dries quickly. However, if you have oil-based paint, it might not adhere as well as B-I-N.
3. Preparation
Sanding: Ensure that you sand the areas around the original frames to promote adhesion. A light sanding (220-grit) should suffice.
Clean the Surface: After sanding, clean the surfaces to remove dust and debris. Use a damp cloth or sponge and let it dry completely.
4. Painting
Once primed, use a high-quality paint that matches your new architrave. If possible, bring a sample of the old paint to a paint store for color matching.
5. Testing
If you're concerned about the costs, consider doing a small test area with both primers. This can help you assess the adhesion and finish before committing to the whole project.
Conclusion
While Zinsser B-I-N may be pricier, it’s a reliable choice that can save you time and hassle in the long run. If you go with B-I-N, you should have a good bond and finish. If you decide to use Zinsser 1-2-3, just ensure the surface is properly prepared for the best results. Good luck with your project, and I hope your home sells quickly!
1. Assess the Current Paint
Since you're unsure what type of paint is currently on the frames, it’s best to determine if it’s latex or oil-based. You can do this by applying a small amount of rubbing alcohol or acetone to a cotton ball and rubbing it on the paint. If it comes off, it's latex; if it doesn’t, it’s likely oil-based.
2. Primer Recommendations
Zinsser B-I-N: This is an excellent choice for a high-bonding primer. It’s a shellac-based primer, which adheres well to glossy surfaces, prevents bleed-through from stains, and works for both latex and oil-based paints. It's a bit more expensive, but it’s worth it for the quality and quick drying time, especially when you’re on a tight schedule.
Zinsser 123: If you want to save a bit and still have a good bonding primer, consider Zinsser 1-2-3. It’s a water-based primer that adheres well to various surfaces, is stain-blocking, and dries quickly. However, if you have oil-based paint, it might not adhere as well as B-I-N.
3. Preparation
Sanding: Ensure that you sand the areas around the original frames to promote adhesion. A light sanding (220-grit) should suffice.
Clean the Surface: After sanding, clean the surfaces to remove dust and debris. Use a damp cloth or sponge and let it dry completely.
4. Painting
Once primed, use a high-quality paint that matches your new architrave. If possible, bring a sample of the old paint to a paint store for color matching.
5. Testing
If you're concerned about the costs, consider doing a small test area with both primers. This can help you assess the adhesion and finish before committing to the whole project.
Conclusion
While Zinsser B-I-N may be pricier, it’s a reliable choice that can save you time and hassle in the long run. If you go with B-I-N, you should have a good bond and finish. If you decide to use Zinsser 1-2-3, just ensure the surface is properly prepared for the best results. Good luck with your project, and I hope your home sells quickly!