Clarke air compressor dipstick

All tool questions and recommendations or complaints in this forum please

Moderator: Moderators

Post Reply
kevinwebb66
Newly registered Member
Posts: 1
Joined: Thu Aug 11, 2022 10:24 pm
Has thanked: 0
Been thanked: 0

Clarke air compressor dipstick

Post by kevinwebb66 »

I have an older Clarke Pioneer 215 compressor that's in cood condition but the dipstick has gone missing. A quick search shows that the compressor unit and disptick were common to lots of other models including Champ 265, Hunter 54 30, Rebel 65, Warrior 40 and Tiger 9/54. The Clarke part number is FN012089000. If anyone has one of these compressors could you please measure the dipstick and post the dimensions - critically the length from point where dipstick sits in the top of the compressor casing down to the high and low oil level marks. It looks like I can get a replacement part for a couple of quid but it's close to £20 when the postage and vat is added. Thanks
Post Reply

Return to “Tool Talk”