I was wondering if anybody has got one of these or if there is a general opinion about them.
I tend to be very accurate when measuring and was wondering about the sort of tolerance these give.
The spec states +/- 1.5mm, usually these things err on the side of caution so I'd expect it to be better than that.
Any thoughts?
Cheers
Anybody got the Bosch DLE 50 laser measure
Moderator: Moderators
-
ultimatehandyman
- Site Admin
- Posts: 24424
- Joined: Sat Jul 16, 2005 7:06 pm
- Location: Darwen, Lancashire
- Has thanked: 1012 times
- Been thanked: 918 times
It looks like an expensive piece of kit!
I have the Irwin sonic measure, which is probably not as accurate as the bosch laser Model.
I only use the irwin to get and approximate measure and if I am doing something critical then I use the tape measure.
It looks like a useful bit of kit, but it is a bit pricey for what it does.
So I think I'll be sticking with my sonic measure and tap measure for now
I have a few of the Irwin measures that can be won in the forum competition.
I have the Irwin sonic measure, which is probably not as accurate as the bosch laser Model.
I only use the irwin to get and approximate measure and if I am doing something critical then I use the tape measure.
It looks like a useful bit of kit, but it is a bit pricey for what it does.
So I think I'll be sticking with my sonic measure and tap measure for now
I have a few of the Irwin measures that can be won in the forum competition.