www.ultimatehandyman.co.uk

Hi, I will be putting down Ball F75 Liquid DPM onto a newly screeded floor. Just wondering if you can tile straight onto Epoxy Resin once its fully cured?

Thanks

*Tiling

The new screed...does this not have a dpm under it??

What type off screed is it...how thick is it??

The new screed will need to cure before a liquid dpm is applied..

You will need to prep the screed before pouring the dpm...I.e.remove latiance and if smooth,.. key it up...

Apply a primer to screed then follow mfr inst..

Then after dpm set(two coats)...applied in opposite directions....apply a primer before tile fixing...your adhesive mfr will specify correct primer..

Also if there is water ufh or elect ufh...you can't use a liquid dpm..