www.ultimatehandyman.co.uk

Circular Saw £35
2000w Table Saw £100
Discs £4
Vice £20
Diamond Drill bits and guide £6
SDS plus Drill £40
SDS Masonary drill bits £12
50 piece drill bit sets £8
Racking £35
Ratchet bit and socket nut set £13
Crimping pliers £8
5 in 1 Detector £17
Multimeter £10
Digital caliper and Angle finder £10 each
Cable reel £10

http://www.lidl.co.uk/en/our-offers-2491.htm?id=924

OK thanks for that.

Thanks Did anyone notice that there are circular saw blades - 160mm diameter x 2.2mm kerf (42 and 48 tooth)?

Did anyone notice the saw blades look like Bill & Ben and Weed in the middle.

http://www.lidl.co.uk/en/our-offers-2491.htm?id=924

If they are like last time though the blades are 30mm bore so don't fit my track saw :(

Rorschach wrote:If they are like last time though the blades are 30mm bore so don't fit my track saw :(

Can you not use a bore adaptor?

steviejoiner74 wrote:

Rorschach wrote:If they are like last time though the blades are 30mm bore so don't fit my track saw :(

Can you not use a bore adaptor?

Nope the arbour of the saw is only 30mm with a 20mm step for the blade. If I use a bore adapter the blade will fit but there is no bearing surface touching the arbour, as soon as you spin it up the blade would come loose.