Kitchen drawer front came off help need

taffer877 · Post by **taffer877** » Sun Nov 15, 2020 3:16 pm

Hi my drawer door came off this morning and ideally I would like to reattach it but when I try it seems to be a struggle to get it back inside the clip (inside the cabinet door drawers).

The clip inside seems to be from FGV but I am not sure how it was originally installed and can't seem to find any precise name for it anywhere... all the videos on youtube seem to be about Blum...

Please can someone help me find a low cost solution to fix the problem?

Pictures attached,

dewaltdisney · Post by **dewaltdisney** » Sun Nov 15, 2020 3:26 pm

Is there a slot for a screwdriver somewhere? That looks like a cam action raises the locking bars that then grip the hooks on the drawer front.

DWD

dewaltdisney · Post by **dewaltdisney** » Sun Nov 15, 2020 5:41 pm

The screw may be underneath in the runner channel. It will probably only turn a half but that will grab the hooks and lock the drawer front into place. Pull the drawer out a bit and have a good look all around the sides and open end.

DWD

darrenba · Post by **darrenba** » Sun Nov 15, 2020 6:46 pm

You need to get the white bit out from the side of the drawer and clip it to the metal bracket on the front. Should pop out using a screwdriver in the 1st photo.

darrenba · Post by **darrenba** » Sun Nov 15, 2020 6:49 pm

This is what they look like

https://www.amazon.co.uk/Original-Kitch ... B07M7L35BP