LPG Stoves

Stoves and stove related questions

Moderator: Moderators

Post Reply
User avatar
kellys_eye
Senior Member
Posts: 12309
Joined: Mon Mar 15, 2010 11:49 pm
Location: Oban
Has thanked: 357 times
Been thanked: 1790 times

LPG Stoves

Post by kellys_eye »

No, we're not traitors to the cause as we have a woodstove already but we also have a largish extension (sunroom) that sometimes needs heating in the winter. The woodstove heat is usually enough to keep the sunroom warm until it gets to minus-numbers outdoors when some supplementary heating would seem to be of benefit.

We're undecided as to flued or unflued but suspect, for simplicity, that the unflued version will win that argument but other than browsing a gazillion available versions I have yet to meet or discuss these devices with anyone that has PRACTICAL experience of them.

So.... anyone got one? Pro's and con's
Don't take it personally......
User avatar
big-all
Pro Carpenter
Posts: 23577
Joined: Sat Dec 16, 2006 10:11 pm
Location: redhill surrey an auld reekie laddie
Has thanked: 735 times
Been thanked: 2339 times

LPG Stoves

Post by big-all »

parafin lpg or gas all give out about a gallon off water per gallon burned :dunno:
we are all ------------------still learning
dewaltdisney
Senior Member
Posts: 16987
Joined: Fri Jan 20, 2006 5:51 pm
Location: Essex
Has thanked: 814 times
Been thanked: 3508 times

LPG Stoves

Post by dewaltdisney »

I would always go for an appliance that is room sealed drawing air in and venting waste products out to the outside air. A thing that sticks in my mind was back in the 60's when I was with the gas board. The natural gas conversion was well underway and part of the programme was ensuring enough air got into the room through vents. These were a bit self-defeating in heat loss terms with bloody drafts blowing through but the new gas needed more air to burn clean. We had a terrible case where a chap had unwittingly blocked all drafts in his bathroom to stop the cold. Unfortunately, he had one of those old fashioned water heaters over the bath, we used to call them geezers, and these appliances used a fair bit of fuel running a bath. Regrettably, his young daughter died in the bath as a result of monoxide poisoning. It was a terrible thing to happen and I have never forgotten her name, it sticks with me. So I may be biased towards the flued type of appliance.

I am sure you have thought of that issue already.

DWD
User avatar
kellys_eye
Senior Member
Posts: 12309
Joined: Mon Mar 15, 2010 11:49 pm
Location: Oban
Has thanked: 357 times
Been thanked: 1790 times

LPG Stoves

Post by kellys_eye »

Modern gas heaters (well, some) are fitted with catalytic converters that ensure 100% combustion and no CO - the ones I'm looking at also monitor oxygen levels and shut off if they drop 1.5%. Of course the mandatory 100cm^2 vent has to be properly fitted but that's just common sense.

As for condensation...... funnily enough that's not mentioned in all the bumpf and is usually an issue I know so maybe a flued one is better?
Don't take it personally......
User avatar
Someone-Else
Senior Member
Posts: 14609
Joined: Sat Sep 01, 2012 6:03 pm
Has thanked: 47 times
Been thanked: 2571 times

LPG Stoves

Post by Someone-Else »

big-all wrote: Thu Dec 24, 2020 2:11 pmparafin lpg or gas all give out about a gallon off water per gallon burned
Trying to understand how it can give off a gallon of water, if you only have a gallon of fuel in the first place? :scratch:
These users thanked the author Someone-Else for the post:
APDIY (Tue Jan 12, 2021 9:25 am)
Rating: 7.14%
Above are my opinions Below is my signature.

Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.

:mrgreen: If gloom had a voice, it would be me.

:idea1: Click Here for a video how to add/change pictures


Inept people use the QUOTE BUTTON instead of the QUICK REPLY section :-)
User avatar
wine~o
Senior Member
Posts: 26269
Joined: Sat Jan 10, 2009 3:49 pm
Location: hants/dorset border
Has thanked: 1414 times
Been thanked: 4017 times

LPG Stoves

Post by wine~o »

Someone-Else wrote: Thu Dec 24, 2020 5:38 pm
big-all wrote: Thu Dec 24, 2020 2:11 pmparafin lpg or gas all give out about a gallon off water per gallon burned
Trying to understand how it can give off a gallon of water, if you only have a gallon of fuel in the first place? :scratch:
https://www.bbc.co.uk/bitesize/guides/z ... revision/3 Chemistry dear Boy.
Verwood Handyman

_____________________________________________________________________________

If you feel you have benefited from the Free advice given on the Forum, Please consider making a donation to UHM's Nominated charity, read all about it and donate here :

http://www.donnasdreamhouse.co.uk
User avatar
Razor
Senior Member
Posts: 8760
Joined: Wed Nov 14, 2007 10:21 pm
Location: Northampton
Has thanked: 483 times
Been thanked: 1251 times

LPG Stoves

Post by Razor »

Old tech but you can't go wrong with a Baxi Brasilia assuming you just need a couple of kW output.

Flueless fires are safe if installed exactly to regs but they are a decorative fire and the heat they give 1% of the year doesn't make up for the drafts the rest!
I think I'll take two chickens...
User avatar
camallison
Senior Member
Posts: 453
Joined: Mon Aug 11, 2014 7:22 pm
Location: North Yorkshire
Has thanked: 127 times
Been thanked: 108 times

LPG Stoves

Post by camallison »

We have a balanced flue gas fire that exits outside, and draws in air that way too. It even has a remote control.
Best thing we did, buying it.

Colin
User avatar
Someone-Else
Senior Member
Posts: 14609
Joined: Sat Sep 01, 2012 6:03 pm
Has thanked: 47 times
Been thanked: 2571 times

LPG Stoves

Post by Someone-Else »

wine~o wrote: Thu Dec 24, 2020 5:48 pm Chemistry dear Boy.
It says you get water (I never questioned that) but what I don't understand is how you get 1 gallon of water if you only had 1 gallon of fuel
Above are my opinions Below is my signature.

Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.

:mrgreen: If gloom had a voice, it would be me.

:idea1: Click Here for a video how to add/change pictures


Inept people use the QUOTE BUTTON instead of the QUICK REPLY section :-)
Post Reply

Return to “Stoves”