Refill Vaillant Boiler - help please!

Questions about central heating and boiler questions in here please.

Moderator: Moderators

Post Reply
Dave1982
Newly registered Member
Posts: 2
Joined: Tue Aug 27, 2024 5:00 pm
Has thanked: 0
Been thanked: 0

Refill Vaillant Boiler - help please!

Post by Dave1982 »

I was hoping someone could help me with what I expect is a pretty basic query. My boiler has lost pressure & I need to refill it. Have searched online & watched videos, it seemed relatively straightforward with the videos showing a tap or screw being opened to allow the filling loop to let water into the boiler. However, my filling loop is shown on the attached & I can't work out how to open the filling loop to allow water into the boiler.
Boiler 1.jpg
Boiler 1.jpg (181.52 KiB) Viewed 861 times
I am guessing that I need to open the left hand side as it looks like there is a thread for something in the hole just above where the filling loop connects to the pipe, but I cannot work out whether something is missing (such as a tap), whether a some kind of key needs entering into the hole (which I don't think I have) or whether the entire part needs turning with a wrench.

Any help would be gratefully received.

Thanks.
User avatar
Someone-Else
Senior Member
Posts: 14572
Joined: Sat Sep 01, 2012 6:03 pm
Has thanked: 47 times
Been thanked: 2556 times

Refill Vaillant Boiler - help please!

Post by Someone-Else »

A handle is missing, I know this because............

missing.jpg
missing.jpg (60.06 KiB) Viewed 853 times

It looks just like mine.

It's supposed to have a handle like you find on a washing machine valve (The bit the hose connects to, one is red, the other is blue) But like mine, they often snap, so I just use an adjustable spanner. You turn the outer square part. There should also be another "handle" (usually bigger) on the other end of the braided pipe, but I can't see one in your picture.


Here is what my "filling loop" looks like from further back

other end.jpg
other end.jpg (74.69 KiB) Viewed 851 times
I have to turn the black lever as well as the one with the missing handle
Last edited by Someone-Else on Tue Aug 27, 2024 5:32 pm, edited 1 time in total.
Above are my opinions Below is my signature.

Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.

:mrgreen: If gloom had a voice, it would be me.

:idea1: Click Here for a video how to add/change pictures


Inept people use the QUOTE BUTTON instead of the QUICK REPLY section :-)
dewaltdisney
Senior Member
Posts: 16935
Joined: Fri Jan 20, 2006 5:51 pm
Location: Essex
Has thanked: 807 times
Been thanked: 3496 times

Refill Vaillant Boiler - help please!

Post by dewaltdisney »

The valves probably had plastic taps that got soft and the square drive turned into an oval. I had my Vailllant filling loop taps replaced with metal ones which are far better. Use a square drive or a socket so the edges are preserved. I cannot see clearly if that is an isolator at the other end used to stop backflow?

DWD
Dave1982
Newly registered Member
Posts: 2
Joined: Tue Aug 27, 2024 5:00 pm
Has thanked: 0
Been thanked: 0

Refill Vaillant Boiler - help please!

Post by Dave1982 »

Thank you both for your help - I now have hot water again!!
Post Reply

Return to “Central Heating & Boilers”