Advice for a small paved area.

Please use this forum for all DIY posts that do not fit into a specific category.

Moderator: Moderators

Post Reply
Berkeley Ste
Newly registered Member
Posts: 1
Joined: Wed Aug 14, 2024 6:23 pm
Has thanked: 0
Been thanked: 0

Advice for a small paved area.

Post by Berkeley Ste »

Evening all,
I’ve recently dug out a small area at the front of my house (picture attached). There was a number of bushes and small trees planted there. I’m hoping to pave the area but I’m unsure as to what I need to do to prepare the area before laying slabs. It’s is pretty soft soil as I’ve had to turn it over to get all the weeds and roots out. I’m aware that I’ll have to compact it down, but not sure what’s best to do after that.

Any tips/advice greatly appreciated.

Cheers all

Steve
Attachments
IMG_7600.jpeg
IMG_7600.jpeg (555.16 KiB) Viewed 455 times
User avatar
Someone-Else
Senior Member
Posts: 14572
Joined: Sat Sep 01, 2012 6:03 pm
Has thanked: 47 times
Been thanked: 2556 times

Advice for a small paved area.

Post by Someone-Else »

As it's obviously a low traffic area, my guess would be to compact the soil as much as you can, lay weed proof membrane, a 5cm layer of sand then put down your slabs. BUT don't take my word for it, have a look at the paving expert Click me
Above are my opinions Below is my signature.

Would you hit a nail with a shoe because you don't have a hammer? of course not, then why work on anything electrical without a means of testing Click Here to buy a "tester" just because it works, does NOT mean it is safe.

:mrgreen: If gloom had a voice, it would be me.

:idea1: Click Here for a video how to add/change pictures


Inept people use the QUOTE BUTTON instead of the QUICK REPLY section :-)
Amanda Bills
Newly registered Member
Posts: 1
Joined: Wed Sep 04, 2024 5:23 am
Has thanked: 0
Been thanked: 0

Advice for a small paved area.

Post by Amanda Bills »

Level the area and compact the soil. Lay a sand base to ensure evenness. Consider using edging stones for a neat finish. If unsure, consult a professional.
Post Reply

Return to “General DIY forum”